10:09 | Thu | 19 November 2026
Most restaurant and café patios plan for roughly 15–20 sq ft (1.4–1.9 m²) per outdoor seat, a little more generous than indoor dining because umbrellas, heaters and wider service paths all take floor space. As a starting point, keep main service aisles at 42–48 in (105–120 cm), allow 18–24 in (45–60 cm) behind each table edge for chair pull-back, and confirm the final plan with your local authority before you order furniture.
Outdoor seating almost always needs more room per guest than the dining room. The ranges below include each seat’s share of aisles and are planning figures, not code requirements.
| Patio type | Typical space per seat | Notes |
|---|---|---|
| Compact café or bistro terrace | 12–15 sq ft (1.1–1.4 m²) | Small 2-tops, quick turnover, narrow sidewalk frontage |
| Standard restaurant patio | 15–20 sq ft (1.4–1.9 m²) | Mix of 2-tops and 4-tops, umbrellas, clear service path |
| Relaxed or lounge-style terrace | 20–25 sq ft (1.9–2.3 m²) | Armchairs, heaters, planters, wider circulation |
To estimate capacity, divide the usable area (after removing entrances, exit paths and fixed obstacles) by your chosen figure, then test the number against a drawn plan. For the indoor side of the calculation, see our guide to restaurant space per seat and seating capacity.
Measure edge to edge. A seated guest typically occupies 18–24 in (45–60 cm) behind the table edge, so two back-to-back chairs already use about 4 ft (120 cm) before anyone walks between them.
| Situation | Typical edge-to-edge distance |
|---|---|
| Table edge to wall, railing or planter (chair in between) | 30–36 in (75–90 cm) |
| Between tables, chairs back to back, no walkway | 48–54 in (120–135 cm) |
| Between tables with a service walkway between chairs | 66–72 in (165–180 cm) |
| Corner to corner in a diagonal layout | 30–36 in (75–90 cm) |
Armchairs need a little more width per place than side chairs, and outdoor chairs are often deeper, so check the actual footprint of the model you choose rather than relying on indoor rules of thumb.
Many outdoor parties are couples or small groups, so a layout weighted toward 2-tops that can be pushed together usually fills better than fixed large tables. Common sizes:
When you compare outdoor tables for restaurants, check the base footprint and weight as well as the top, since a heavier base resists wind and a compact base leaves more legroom.
In the US, ADA requirements for dining areas generally apply outdoors too. In short, a share of seating (commonly at least 5%) should be at accessible tables with a surface height of 28–34 in (71–86 cm) and knee clearance underneath, reached by an accessible route with level, firm transitions from the building. Outside the US, check national and local rules.
Often, yes. Sidewalk cafés and patios on public land usually need a permit from the city or municipality. Typical conditions cover the permitted area, the clear pedestrian path that must stay open, barriers, opening hours, umbrellas and heaters, and whether furniture must be removed overnight. Check with your local authority before buying furniture, and keep a dimensioned plan ready for the application.
Seatingpoint offers commercial patio chairs in aluminum, stainless steel, synthetic weave and rattan-look styles, with outdoor tables and bar stools to match.
Most restaurant patios plan for about 15–20 sq ft (1.4–1.9 m²) per seat, including aisles. Compact café terraces with small 2-tops can work with 12–15 sq ft (1.1–1.4 m²), while lounge-style terraces with armchairs and heaters often need 20–25 sq ft (1.9–2.3 m²). Always confirm the final number on a dimensioned plan.
Plan the main service path at about 42–48 in (105–120 cm) so a server with a tray can pass standing guests. Secondary aisles should be at least 36 in (90 cm), and in the US the accessible route should be at least 36 in (91 cm) wide. Exits and doorways must stay fully clear.
Measured edge to edge, allow about 48–54 in (120–135 cm) between tables when chairs sit back to back with no walkway, and about 66–72 in (165–180 cm) where staff need to walk between seated guests. Check the real depth of the outdoor chairs you choose, because they are often deeper than indoor models.
In most cities, seating on a public sidewalk requires a permit. Conditions usually cover the seating area, a clear pedestrian path, barriers, hours, heaters, umbrellas and overnight removal of furniture. Requirements vary widely, so check with your local authority before buying furniture and prepare a dimensioned layout plan for the application.
Aluminum is a practical default because it is light, rust-free and often stackable. Stainless steel suits windy or very busy sites, while synthetic weave and rattan-look furniture give a warmer look for lounges and hotel terraces. Stackable models make nightly clearing and winter storage much easier.
Planning a new terrace or refreshing an existing one? Order samples of outdoor chairs and finishes, shipped within 2–4 business days, or contact the Seatingpoint team for help choosing patio furniture for your layout.